COLLISION DIAGNOSIS
For Frontal Collision
FOR FRONTAL COLLISION: When SRS is activated in a collision
CAUTION:
Due to varying models and option levels, not all parts listed in the chart below apply to all vehicles.
WORK PROCEDURE
- Before performing any of the following steps, ensure that all vehicle body and structural repairs have been completed.
- Replace the diagnosis sensor unit.
- Remove the front air bag modules, crash zone sensor assembly, bracket and seat belt pretensioner assemblies.
- Check the SRS components using the table below: Replace any SRS components showing visible signs of damage. (dents, cracks and deformation, etc.)
- Install new front air bag modules, crash zone sensor assembly, bracket and seat belt pretensioner assemblies.
- Perform self-diagnosis using CONSULT-III or air bag warning lamp. Refer to See: Air Bag Systems\Testing and Inspection\Scan Tool Testing and Procedures\On Board Diagnostic (OBD) System\Self-Diagnosis Function (Without CONSULT-III) for details. Ensure entire SRS operates properly.
- After the work is completed, perform self-diagnosis to check that no malfunction is detected. Refer to See: Air Bag Systems\Testing and Inspection\Component Tests and General Diagnostics.
SRS INSPECTION (FOR FRONTAL COLLISION)
FOR FRONTAL COLLISION: When SRS is not activated in a collision
CAUTION:
Due to varying models and option levels, not all parts listed in the chart below apply to all vehicles.
WORK PROCEDURE
- Before performing any of the following steps, ensure that all vehicle body and structural repairs have been completed.
- Check the SRS components using the table below: Replace any SRS components showing visible signs of damage. (dents, cracks and deformation, etc.)
- Perform self-diagnosis using CONSULT-III or air bag warning lamp. Refer to See: Air Bag Systems\Testing and Inspection\Scan Tool Testing and Procedures\On Board Diagnostic (OBD) System\Self-Diagnosis Function (Without CONSULT-III) for details. Ensure entire SRS operates properly.
- After the work is completed, perform self-diagnosis to check that no malfunction is detected. Refer to See: Air Bag Systems\Testing and Inspection\Component Tests and General Diagnostics.
SRS INSPECTION (FOR FRONTAL COLLISION)
|
