Perform the Refrigerant Discharging and Recovery Procedure.
Remove the fan shroud.
Remove the screws and position the power steering pump reservoir aside.
Remove the A/C manifold and tube support Clip retaining bolt.
Disconnect the A/C manifold and tube spring lock coupling.
CAUTION: Plug all ports to prevent contamination from dirt or moisture.
Remove the bolt.
Disconnect the A/C manifold and tube spring lock coupling.
CAUTION: Plug all ports to prevent contamination from dirt or moisture.
Raise and support the vehicle.
Remove the screws and the radiator air deflector.
Detach the A/C manifold and tube from the A/C manifold and tube support clip.
Loosen the A/C manifold and tube retaining bolt and remove the A/C manifold and tube.
CAUTION: Plug all ports to prevent contamination from dirt or moisture.
INSTALLATION
To install, reverse the removal procedure.
Lubricate the O-ring seals with PAG Refrigerant Compressor Oil (R-134a Systems) F7AZ-19589-DA (Motorcraft YN-12-C) or equivalent meeting Ford specification WSH-M1C231-B.