Your Vehicle: 2001 Ford Escort ZX2 L4-2.0L DOHC VIN 3
 
Vehicle » Lighting and Horns » Turn Signal Switch » Service and Repair » Multifunction Switch - Hazard/Flasher Switch  
 
 
  Multifunction Switch - Hazard/Flasher Switch  
 

Removal

  

  1. Disconnect the battery ground cable and wait one minute for the air bag backup power supply to be depleted.

  

  1. Remove the screws and the upper and lower steering column shrouds.

  

  1. Detach the hazard/flasher switch from the multi-function switch housing.
1 Remove the screws.
2 Detach the hazard/flasher switch from the multi-function switch housing.

  

  1. Disconnect the electrical connector and remove the hazard/flasher switch.

Installation

  

  1. NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn its strategy.

To install, reverse the removal procedure.